PSBC990 Cabinet Ideal for blasting engine
parts, wheels, gearboxes etc
This is our New style blast cabinet!
Its a Pressure Blast Cabinet not a suction
Its been built to perfectly combine the
traditional sandblast cabinet and the abrasive blasting pot.
Combining the 2 has given a better
controlled working space with the high blasting pressure of an external pot
reducing blasting time dramatically .
It has a large working space which is
suitable for various projects.
It is foot operated giving the user flexible
operation of the machine.
Sand Blast efficiency: 100cm²/min Working
Tank Volume 22 litres
Approx Measurements are:
External: Height 81 inches ( 260 cm )
Depth including the dust extractor 47
inches ( 120 cm )
Width 55 inches ( 140 cm ) From the floor
to the top of the door when fully open is 97 inches ( 247 cm )
Internal: Width 46.5 inches ( 118 cm )
Depth 34 inches ( 86 cm )
Height from the grill upwards 33 inches (
85 cm )
The Step Width 43 inches ( 110 cm )
Depth 16 inches ( 40 cm )
Height 14 inches ( 35 cm )
Air requirements 60-125PSI @19cfm
The PSBC990 pressurized sandblast cabinet
features a higher velocity stream that allows work to be done up to 4 times
faster than other sandblast cabinets on the market. The direct pressure system
which pneumatically pushes the blast media through the air hose, makes it is
possible to clean hard to reach areas that are impossible with other sandblast
cabinet models. The PSBC990's direct pressure system is best utilized on heavy
steel or extra thick coatings that require additional friction on the surface
to be removed. But the PSBC990 also comes equipped with a pressure valve to
lower the blasting pressure for more sensitive parts.
The PSBC990 has a large front folding door
for easy loading and unloading. It has excellent lighting and a very powerful
vacuum system. The lower hopper stores the abrasive material for use and reuse
and opens easily to allow easy removal of any media. The pressurized tank below
the hopper allows for an adjustable, high pressure air flow of abrasive
material to be blasted.
The PSBC990 is always ready when you are.
The cabinet can be constantly connected to your air supply and is ready for
immediate use when you step on the pedal. Use your new sandblast cabinet to
remove scale or heavy rust from automotive parts, clean up rusty tools, etch
glass, or any other special application.
The PSBC990 incorporates a powerful vacuum
system that keeps the work area free of "floating" rust and used
glass bead shells. After the glass bead “slams against” the surface to be
cleaned, a portion of the bead is "destroyed" and becomes almost
weightless. The vacuum system removes the "floating" rust particles
and the "used up" glass bead shell while the “good beads’ fall into
the hopper below the work surface.
The PSBC990 uses a foot pedal to control
the flow of abrasives from the air nozzle. The foot pedal allows the operator
to just “hold and point” the nozzle rather than the need to “pull a trigger” of
other sandblast cabinets which can be very tiresome.
Equipment stocks a full line of parts and accessories for our sandblast
cabinets. We stock replacement gloves, vacuum media filters, peel-off lenses,
and replacement nozzles along with many other wearable sandblast cabinet parts.